Back

PGS200 Profilometer

Contour Measurement

PGS200 profilometer is an instrument of new generation, able with a few simple operations, to characterise the profile of also complex pieces, thanks to the modern “all in one” logic: with just a few operations, it is immediately ready and calibrated to take measurements. Profile Studio software installed on PGS200 was conceived to be extremely user-friendly and easy to use by the operator.

The functions required for the characterization of the profile are grouped into categories (points, line, arcs, sizes), each of different colour to be easily identified. The CAD is highly advanced: all items are dynamic and can be edited after being input.

For more complex pieces, PGS 200 allows to execute measurement cycles and therefore, obstacles are automatically overcome (grooves, shouldered parts), and the profile is reconstructed at the end of the measurement. Thanks to the motorized column, calibration takes place automatically like the measuring cycles, thus ensuring a remarkable saving of time and high flexibility.

Product Overview

Measurement range in X: 220 mm (8.66 in)
Measurement range in Z: 50 mm (1.97 in)
Resolution on the X axis: 0.5 μm (0.02 μin)
Resolution on the Z axis: 0.1 μm (0.008 μin)
Positioning speed: 0 – 10 mm/s (0 – 0.4 in/s)
Measurement speed: 0.2 - 0.5 – 1 – 2 mm/s (0.008 - 0.02 – 0.04 – 0.08 in/s)
Traverse length of column: Column with a positioning of 320 mm (12.6 in) or 520 mm (20.5 in) manual or motorized CNC
Measurement tip: Tip radius 20 μm (0.8 μin) and front roundness
CNC cycles: CNC automatic measurement and positioning cycles with self-comparison
Software: Profile Studio

Everything you need to start measuring from day one.

Find out more about the PGS200 Profilometer

Subject
Name
Email Address
Telphone Number
Message

Email

info@ecggauging.co.uk

Phone

+44 (0)1452 545563

Address

10 King Edwards Avenue, Gloucester, GL1 5DA, United Kingdom.