Add to Quote
Back

Aberlink Horizon L CMM

Coordinate Measuring Machines | CMMs

Extending The Linear Drive Horizon

Drawing upon the tremendous success of the Horizon, the Horizon L has a larger X-Y-Z axis travel whilst utilising the same frictionless linear drives.

The entire design of the Horizon L has been optimised to take full advantage of parts already used on the Horizon 800 whilst improving the stiffness-to-weight ratio across the bridge assembly. Most notably: The Y-axis rail is 200mm taller so that the same right-hand-side linear drive system is common and improves rigidity; the carriage assembly has reduced in size and weight, without compromising metrology performance, to improve the stiffess-to-weight ratio; the Z-axis motor has increased power to optimise its performance; the left-hand-side air bearing assembly has a custom extruded profile to keep weight to an absolute minimum and maintain stiffness.

High-performance, High-accuracy

The Horizon L is a standout machine with fast, smooth, silent motion ideally suited to contact scanning and with a first-term accuracy specification of under two microns.

Unrivalled Reliability

Linear motors are non-contact and therefore have no wearing parts and thus provide the perfect solution for CMM drives, improving reliability and reducing maintenance.

Making Measurement Easy

Every Aberlink CMM is supplied with the industry standard Aberlink 3D measurement software. World renowned for its easy-to-use, yet powerful interface, Aberlink is the only leading CMM manufacturer to offer zero-cost annual software maintenance contracts or subscriptions and free software updates, including all major releases. This means cost of ownership is very low and ensuring rapid ROI.

£ 48,300.00 ex VAT

Product Overview

Axis Travel (mm): X 1000 | Y 1200, 2000, | Z 800
Overall Size (mm): X 1603 | Y 1830, 2630, | Z 2956
Motion: CNC
Structure: Bridge
Suitable for: Inspection Room
Drive Type: Linear
Volumetric Accuracy: TP20 (1.9 + L/250)µm | TP200 (1.8 + L/250)µm | SP25M (1.75 + L/250)µm
Scale Resolution: 0.1µm
Optimum Temp Range: 18 - 22°C
Operational Temp Range: 5 - 45°C
Table: Solid Granite
Load Capacity: 1000kg
Max. Velocity Vector: 1000mm/sec
Max. Acceleration Vector: 1000mm/sec²
Air Required: Yes
Air Consumption: 100 l/min (3.53 cfm)
Required Air Pressure: 7 bar (100 psi)
Aberlink Camera Support: Yes

Everything you need to start measuring from day one.

Find out more about the Aberlink Horizon L CMM

Subject
Name
Email Address
Telphone Number
Message

Email

info@ecggauging.co.uk

Phone

+44 (0)1452 545563

Address

10 King Edwards Avenue, Gloucester, GL1 5DA, United Kingdom